ANIONIC BITUMEN EMULSION SS-1H
INTRODUCTION OF ANIONIC BITUMEN EMULSION SS-1H
Anionic Bitumen Emulsion SS-1h is a widely used emulsified asphalt product that has a wide range of applications in the construction industry. It is a type of asphalt emulsion that is produced by blending asphalt with water and an anionic surfactant. This page will provide an in-depth overview of Anionic Bitumen Emulsion SS1h, including its product description, history, properties, production, specifications, advantages, safety tips, and applications.
Anionic Bitumen Emulsion SS-1h Brief Description:
Anionic Bitumen Emulsion SS-1h is a dark brown liquid that is produced by blending asphalt with water and an anionic surfactant. The emulsion is made up of tiny droplets of asphalt suspended in water, which are stabilized by the anionic surfactant. The product has a viscosity of 200-600 cP at 25°C and a density of 1.0-1.1 g/cm³. It is a non-flammable, water-based product that is easy to use and transport.
What is the Anionic Bitumen Emulsion SS-1h?
Anionic Bitumen Emulsion SS-1h is an asphalt emulsion that is used in various applications in the construction industry. It is a type of emulsified asphalt that is produced by blending asphalt with water and an anionic surfactant. The product is designed to be used in applications where the use of hot-mix asphalt is not feasible, such as in cold weather or in areas with limited access to hot-mix asphalt plants.
Anionic Bitumen Emulsion SS-1h History:
The use of emulsified asphalt dates back to the early 1900s when it was first used to control dust on rural roads. Over the years, emulsified asphalt has been developed and refined to improve its performance and expand its applications. Anionic Emulsion SS1h was first introduced in the mid-1960s and has since become one of the most widely used asphalt emulsions in the construction industry.
Anionic Bitumen Emulsion SS-1h Other Names:
Anionic Bitumen Emulsion SS-1h is also known by various other names, including slow-setting anionic emulsion, slow-setting asphalt emulsion, and anionic slow-setting emulsion.
Anionic Bitumen Emulsion SS-1h Grades, Types, and Forms:
Anionic Bitumen Emulsion SS-1h is available in different grades, types, and forms to meet the specific needs of different applications. The different grades are classified based on the viscosity of the emulsion at a specific temperature. The most common grades of Anionic Bitumen Emulsion SS1h are SS-1h, CSS-1h, and MCSS-1h. The different types of Anionic Bitumen Emulsion SS1h are classified based on the type of emulsifying agent used. The most common types are anionic, cationic, and non-ionic. The product is available in different forms, including bulk, totes, and drums.
Different Applications Between Various Anionic Bitumen Emulsion SS-1h Grades, Types, and Forms:
The different grades, types, and forms of Anionic Bitumen Emulsion SS-1h are used in various applications in the construction industry. SS-1h is primarily used in chip seal applications, while CSS-1h is used in slurry seal and micro-surfacing applications. MCSS-1h is used in high-performance chip seal and micro-surfacing applications. The different types of emulsifying agents are used in applications where specific performance requirements must be met. Anionic emulsions are commonly used in cold weather applications, while cationic emulsions are used in warmer weather applications.
Anionic Bitumen Emulsion SS-1h Production Different Types:
Anionic Bitumen Emulsion SS-1h is produced using different production methods, including batch and continuous production. Batch production involves blending the asphalt, water, and surfactant in a tank and agitating the mixture until a stable emulsion is formed. Continuous production involves passing the asphalt, water, and surfactant through a series of high-shear mixers to produce a stable emulsion.
The choice of production method depends on the desired quality and quantity of the product, as well as the production capacity of the manufacturing facility. Continuous production is often used for large-scale production, while batch production is suitable for small-scale production.
Anionic Bitumen Emulsion SS-1h Specifications:
|Viscosity SSF , 25 °C (s)||20||100||ASTM D244|
|Viscosity SSF , 50 °C (s)||—||—||ASTM D244|
|Storage stability, 24h (%)||—||1||ASTM D6930|
|Demulcibility , 0.02 N CaCl2 (%)|
|Cement mixing (%)||2|
|Sieve (%)||0.1||ASTM D6933|
|Residue by distillation (%)||57||ASTM D244|
|Residue penetration, 25 °C||40||90||ASTM D5|
|Solubility in trichloroethylene %||97.5||—||ASTM D2042|
|Residue ductility, 25 °C, 5cm/min (cm)||40||ASTM D113|
Anionic Bitumen Emulsion SS-1h Chemical Formula, CAS Number, and HS Code:
The chemical formula of Anionic Emulsion SS1h is CnH2n+2, where n is the number of carbon atoms in the asphalt. The CAS number of the product is 8052-42-4, and the HS code is 2714.90.00.
Anionic Bitumen Emulsion SS-1h Properties:
Anionic Bitumen Emulsion SS-1h has several properties that make it suitable for use in various applications. The product has a low viscosity, which makes it easy to apply and spread. It also has good adhesion and bonding properties, which allow it to adhere to a variety of surfaces, including concrete, asphalt, and gravel. The product has excellent water resistance and can withstand heavy traffic, making it ideal for use in high-traffic areas.
Anionic Bitumen Emulsion SS-1h Advantages:
Anionic Bitumen Emulsion SS-1h has several advantages over other types of asphalt products. The product is easy to use and transport, as it is a non-flammable, water-based product. It can be used in a variety of applications, including chip seal, slurry seal, and micro-surfacing. The product has excellent adhesion and bonding properties, which allows it to adhere to a variety of surfaces. It is also cost-effective, as it requires less labor and equipment compared to other asphalt products.
Anionic Bitumen Emulsion SS-1h Safety Tips:
Anionic Bitumen Emulsion SS-1h should be handled with care to prevent any accidents or injuries. The product is classified as a skin irritant and can cause skin and eye irritation upon contact. It is important to wear protective clothing, gloves, and eye protection when handling the product. In case of skin or eye contact, the affected area should be flushed with water for at least 15 minutes. If swallowed, do not induce vomiting and seek medical attention immediately.
Factors Affecting Anionic Bitumen Emulsion SS-1h Price:
The price of Anionic Bitumen Emulsion SS-1h is affected by several factors, including the cost of raw materials, production costs, transportation costs, and market demand. The price of asphalt, water, and surfactant, which are the raw materials used to produce the emulsion, can vary depending on market conditions. Production costs, including labor and equipment costs, can also affect the product’s price.
Transportation costs are another factor that affects the product’s price. The cost of transporting the product from the manufacturing facility to the customer’s location can vary depending on the distance and mode of transportation. For example, if the product needs to be transported overseas, the cost of shipping can significantly increase the product’s price.
Market demand is another factor that affects the product’s price. If there is a high demand for the product, the price can increase, and vice versa. Other factors that can affect market demand include government regulations, economic conditions, and weather patterns.
Anionic Bitumen Emulsion SS-1h Applications:
Anionic Bitumen Emulsion SS-1h is used in various applications, including chip seal, slurry seal, and micro-surfacing. In chip seal applications, the emulsion is applied to the road surface, followed by a layer of aggregate chips. The chips are then rolled into the emulsion, creating a durable, skid-resistant surface.
In slurry seal applications, the emulsion is mixed with aggregate and applied to the road surface using a slurry machine. The slurry is then spread evenly across the surface, creating a new, smooth surface.
In micro-surfacing applications, the emulsion is mixed with polymer-modified asphalt, aggregate, and other additives. The mixture is then applied to the road surface using a micro-surfacing machine, creating a thin, durable surface.
Packaging of the Anionic Bitumen Emulsion SS-1h:
Anionic Emulsion SS1h is typically packaged in 55-gallon drums or bulk tanks. The drums are made of high-density polyethylene and can hold up to 440 pounds of the product. Bulk tanks can hold up to 5,000 gallons of the product and are typically used for large-scale projects.
Anionic Bitumen Emulsion SS-1h Transportation and Storage:
Anionic Bitumen Emulsion SS-1h should be transported and stored in accordance with local regulations and industry standards. The product should be transported in a dedicated tank or truck, and the tank or truck should be clearly labeled with the product name, CAS number, and other pertinent information.
During storage, the product should be kept in a cool, dry place, away from direct sunlight and heat sources. The product should also be kept away from sources of ignition, as it is a non-flammable, but combustible product.